Samples within 0.1㎡ are available free of charge. For quantities beyond that, please place an order for purchase. Shipping costs are borne by the customer.
Continue Selecting Samples
| Processing method | Product Number | Single brick size | Brick size | Square meter conversion factor | Number of entries (boxes) | Weight (kg/case) | Suggestion for the mortar joint |
|---|---|---|---|---|---|---|---|
| Broken pieces of tiles | PWFA-295/01~07 | 295×60×10 | / | 56Film/㎡ | 60Film | 20 | 2 |
True Whole Body
Unique dry-mix technology, purer color, more natural dispersion, comparable to the texture of stone
True Varnish
1.7mm varnish depth, L0 is greater than L1, mean value is 0.2mm, mortise and tenon structure, stronger bonding
True High Temperature
1240℃ ultra-high temperature, 70-minute ultra-long firing, texture from the inside out, warm and jade-like, lower absorption rate, stronger stain resistance
True Base Plate
Self-developed formula base plate, lower warping during firing, less side reflection, no "demolding agent" on both sides and back
True Select
10+ selected premium white materials, acid-washed dry-mixed color materials, no fear of consistency inside and outside
True Stability
5 years of clay inventory, 2 years of selected material inventory, quality remains consistent
True Precision
57 operation procedures, 204 process controls, casting excellent quality
True Sorting
100% self-developed and self-produced, 100% full product sorting, no inferior or defective products
■ Differences may occur due to the tolerance of tile sizes.
■ When using black or very dark gray grout, be careful not to let the grout stain the surface of the tiles. It is recommended to test it on an inconspicuous area first.
■ Mixing ratio: Single color
1. Process
1. Apply base coat → Prepare waterproof mortar layer → Arrange tiles and draw lines → Mix tile adhesive → Lay tiles
II. Selection of Waterproof Mortar and Tile Adhesive
The waterproof mortar uses Mabe Elastic Waterproof Mortar 331, and the tile adhesive uses Aihetao C2 grade TC-33 tile adhesive.
III. Construction Methods
The construction should be carried out on the already plastered base layer. The plaster layer must be firm, clean and have a flatness of no more than 2mm.
2. Prepare the waterproof mortar layer
First, wet the plaster layer with water. Then, mix the A and B components of Ma Bei Elastic Waterproof Mortar 331 in the mixing bucket according to the instructions. Use a low-speed electric mixer to stir until it becomes a paste-like consistency. Then, apply it in 1-2 layers with a trowel. One set of waterproof mortar (32KG) can be used to cover an area of 12-15 square meters. The waterproof mortar should not be too thick as it may affect the adhesion of the tiles. Allow the waterproof mortar to cure for more than 7 days before applying the tiles.
3. Arrange the tiles and draw the chalk lines
Re-measure the wall surface, lay out the bricks on the wall, and then draw the chalk lines.
4. Mix the tile adhesive
The water-to-powder ratio is approximately 1:4. First, pour water into the mixing bucket, then add the tile adhesive powder. Use a low-speed electric mixer to stir until the mixture is uniform and free of lumps, and let it stand for 5 minutes. Then stir again to make it uniform before using.
5. Tile Laying
The water curtain stones are laid horizontally from bottom to top. The bricks are laid without any gaps horizontally and with a 2mm gap vertically. They are positioned using 2mm cross-shaped adhesive beads.
Use a scraper to apply the tile adhesive to the wall. Spread it thinly and evenly. Each application covers approximately 1 square meter. After applying the adhesive to the back of the tiles and pressing them onto the wall, gently tap each tile in the middle and at both ends with a wooden handle to make them stick firmly.
![{info.field_group_lang.thumb4.post_other_value_format.alt[$k]}](/upload/images/article/20260526/17797741765114716.jpg)
![{info.field_group_lang.thumb4.post_other_value_format.alt[$k]}](/upload/images/article/20260526/17797741764317456.jpg)
![{info.field_group_lang.thumb4.post_other_value_format.alt[$k]}](/upload/images/article/20260526/17797741769999279.jpg)
![{info.field_group_lang.thumb4.post_other_value_format.alt[$k]}](/upload/images/article/20260526/17797741762378528.jpg)
![{info.field_group_lang.thumb4.post_other_value_format.alt[$k]}](/upload/images/article/20260526/17797623217781901.jpg)
![{info.field_group_lang.thumb4.post_other_value_format.alt[$k]}](/upload/images/article/20260526/17797623218860407.jpg)
![{info.field_group_lang.thumb4.post_other_value_format.alt[$k]}](/upload/images/article/20260526/17797623215677396.jpg)
